Skip to Store Area:

Questions? Advice?
Contact Us!

KSOL Power Solar Box 10BKU - 10 Amp, 12/24 VDC, KSOL Power Solar Charge Controller Enclosure System, USB Charge Port, Indoor Use

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 10 Amp 12 VDC Charge Controller Enclosure System - Closed
    10 Amp 12 VDC Charge Controller Enclosure System - Closed

KSOL Power Solar Box 10BKU - 10 Amp, 12/24 VDC, KSOL Power Solar Charge Controller Enclosure System, USB Charge Port, Indoor Use

Email to a Friend

Be the first to review this product

Availability: In stock.

$209.95
Add Items to Cart Add to Cart

SKU: 020-0KSOL-PB10U

Quick Overview

Vented enclosure houses a solar charge controller and DC circuit breakers for a solar system up to 10 amps. Just attach a solar module, battery and your 12 volt DC load.

Description:

System comes preassembled and prewired including an indoor, vented 12” x 10” x 6” non-metallic enclosure. Hinged door with gasket and closure buckles.

NOTE:

Enclosure may be mounted outdoors but is not outdoor rated. We suggest mounting in a location where it is protected from the rain and sun.

Two wire strain reliefs allow up to 12 individual wire entries for battery, PV module, ground and load wiring.

Charge Controller:

System includes a KSOL Power 10 amp solar charge controller with low voltage disconnect and LED status indicators. Add a PV module or array supplying up to 10 amps maximum. Battery or battery bank can be of any size. DC load should be 10 amps or less (lighting, water pump, inverter, etc.). Charge controller will automatically disconnect the load if battery voltage drops too low, protecting the battery from over-discharge. Charge Controller includes a USP charging port which provides 5 Volt DC USB charging at 1 amp, for charging or powering cell phones, tablets, and other USB devices.

Enclosure must be mounted vertically to prevent moisture from entering enclosure and damaging electronics. Contact us if you require a horizontally mountable enclosure.

System Grounding:

System includes 20 ft. of #8 bare copper ground wire and grounding clamp for grounding equipment.

Battery Connections:

System includes two lugs for attaching wiring (not supplied) to battery screw posts. Use outdoor, UV rated wiring for all connections outside of enclosure.

System is also available in 6,15, 20 and 30 amps.

Free email and phone technical support during office hours.

Warranty:

1 year warranty on system. Manufacturers warranties on individual components also apply.

Please contact us if you have any questions, or if there is no shipping weight noted for a shipping cost quote. Prices online subject to change without notice due to supplier price increases. We will contact you if current price is more than the online price prior to processing the order.